“UL Listed – SHOOTFIRE – 4000/2000” JRCP Type Aqua Foam Nozzle 4000/2000 Variable Flow Monitor Fixed at 4000/2000 GPM

The manually operated non-aspirating Foam Monitor fully made of Stainless Steel, capable to discharging 4000 / 2000 US GPM (15140 / 7570 LPM) at 100 PSI (7 bar) inlet pressure over a range of 80 to 90 meters in horizontal direction and 40 to 45 meters in vertical direction. The Foam Monitor has adjustable flow discharge capacity of 4000 US GPM / 2000 US GPM in single Nozzle Foam monitors are very compact in construction and gives good flexibility of the operation while fighting with fire. Foam proportioning 3 % is done with help of water operated Jet Ratio Controller Pump (JRCP) suitable for feeding foam concentrate solution to the monitor nozzle from a distance of 100 mtrs.

The Foam Monitor has facility for converting Water/Foam jet to fog and vice-versa very quickly and easily, even during continuous operation. Foam Monitor is provided with two numbers of self-locking swivel gear bearing for rotation in horizontal and vertical direction through hand wheel operation even under high operating pressures. A single fire fighter can manually operate the Foam Monitor with large flow & long-range capability. The monitor assembly is designed to withstand the nozzle reaction force experienced during the operation of jet/ fog. The MONITOR and JRCP having the variable discharge capacity of 4000 & 2000 GPM is approved & listed by UL (USA).


  • Certified and Approved by(UL) Underwriters Laboratory USA for use with variable flow.
  • High Discharge Capacity of 2000 & 1000 US GPM (7570 & 3785 LPM) with Single Nozzle at 100 PSI inlet pressure.
  • Excellent Full Fog & Semi Fog Coverage.
  • Variable flow of 2000 & 1000 GPM in single nozzle (benefit of two monitor in single monitor).
  • JRCP is Capable to induct foam from a distance of 100 to the monitor nozzle.
  • JRCP with 3% induction to match variable flow (1000 & 2000 GPM) of monitor nozzle.
  • Very compact in construction and gives good flexibility of the operation while fire fighting
  • Low Expansion, so less loss of foam & more cooling effect on burning surface.
  • Quick change over from jet to fog even under water pressure with single firefighter.
  • Easy maneuverability in horizontal and vertical plane.
  • Fully Stainless Steel Construction..
  • Almost maintenance free.
  • Available In Fixed and Mobile Version.
  • Various Metallurgy Option.
  • Oil and Gas Plants.
  • Off-shore and On-shore platforms.
  • Oil Refineries.
  • Petroleum Storage Tanks and Depots.
  • Chemical and Fertilizer Plants.
  • Steel Plants.
  • Power Plants.
  • Airport Runways.
  • Ammunition Depots.
  • Defense General Stores.
  • Naval Ships and Submarines.
  • Fire Fighting Vessels/Tugs.
  • Ports.
  • Jetties.
Parameter Specification
Flow at 100 psi (7 bar) pressure 4000 / 2000 US GPM
Nozzle Non-aspirating type
Induction Type JRCP Type
Induction Rate 3% (As Per UL Guidelines)
Monitor Elevation +90° & - 10° Vertical
Rotation 360° Horizontal
Water Way Size 200 NB
Inlet Flange Size 8” NB 150# S.O.R.F Flange
Hydrostatic Test Pressure 21 bar
Finish/ Paint Fire red shade of Epoxy / Powder Coating

Material of Construction for Monitor and Nozzle:

Parameter Specification
Base Flange SS 304
Monitor Body SS 304
Swivel Joint SS 304 / Gun Metal / Bronze
Worm Shaft SS 304
Hand Wheel SS 304
Neck Ring SS 304
Foam Intake Coupling SS 304
Foam Nozzle SS 304 / Gun Metal / Bronze / Aluminum
Lifting Hook SS 304
JRCP SS 304
Foam Control Valve SS 304s

  • Monitor also available in metallurgy of SS 316 for special application.

Aqua Foam Jet Control Pump:

  • Water operated foam pump (JRCP) is suitable for feeding foam concentrate solution to the monitor nozzle from a distance of 100 meters & above in horizontal plane. The inlet & outlet of JRCP are provided with 63 mm. Male & female coupling respectively. The monitor comes with 2 Nos. of JRCP for its use at 4000 GPM and single JRCP for its use at 2000 GPM.

Parameter Specification
Material of Aqua Powered Pump SS 304
Inlet and Outlet Coupling 63 mm Male/Female coupling (SS 304)
Foam Induction Rate 3% (as per UL Guidelines)
Pick up tube PVC 3 Meters Long
Aqua Foam Jet Controller is capable to feed foam solution to the monitor nozzle from a distance of 100 meters & above in horizontal plane.

JRCP Collecting Head Unit:

  • The collecting Head unit is used for the control of foam induction at different flow of 2000 GPM and 4000 GPM. This unit consists of 2 no. of 63 mm coupling with valves as an input of rich foam solution from JRCP’s and output is a single 4” coupling for hose connection to the monitor nozzle. Each unit of JRCP act as an foam induction for 2000 GPM to nozzle. Hence 2000 GPM water output at the nozzlerequires 1 JRCP in operation and 4000 GPM of water output requires 2 JRCP in operation.

Performance of Monitor at 100 psi (in still air condition) at Nozzle at 2000 GPM:/h4>
Parameter Specification
Water jet at 30° from Horizontal Plane 80 meters
Foam jet at 30° from Horizontal Plane 75 meters
Fog jet at 30° from Horizontal Plane 20 meters
Water jet at 85° from Horizontal Plane 40 meters

Performance of Monitor at 100 psi (in still air condition) at Nozzle at 4000 GPM:

Parameter Specification
Water jet at 30° from Horizontal Plane 90 meters
Foam jet at 30° from Horizontal Plane 85 meters
Fog jet at 30° from Horizontal Plane 30 meters
Water jet at 85° from Horizontal Plane 45 meters

Approved: UL Listed with following features (Applied but Pending)

Parameter Specification
Nozzle Non Air Aspirating Nozzle
Monitor Solution Flow 4000 / 2000 GPM (single nozzle)
FOperating Pressure 100 PSI
Induction 3% Using JRCP able to feed foam from a distance of 100 meters to nozzle for variable monitor flow of 1000 & 2000 gpm