UL Listed SHOOTFIRE - 2000J JRCP Type Aqua Foam Nozzle 2000J Regular Monitor

The manually operated non-aspirating Foam Monitor made of Stainless Steel, capable to discharging 2000 US GPM (7570 LPM) at 100 psi (7 bar) inlet pressure over a range of 70 to 75 meters in horizontal direction and 35 meters in vertical direction. Foam monitors are very compact in construction and gives good flexibility of the operation while fighting with fire. Foam proportioning 3 % is done with help of water operated Jet Ratio Controller Pump (JRCP) suitable for feeding foam concentrate solution to the monitor nozzle from a minimum distance of 50 meters.

The Foam Monitor has facility for converting Water/Foam jet to fog and vice-versa very quickly and easily, even during continuous operation. Foam Monitor is provided with self-locking swivel gear bearing for rotation in horizontal and vertical direction through hand wheel operation even under high operating pressures. A single fire fighter can manually operate the Foam Monitor with large flow capacity, long-range capability. The monitor assembly is designed to withstand the nozzle reaction force experienced during the operation of jet/ fog.


  • High Discharge Capacity of 2000 US GPM (7570 LPM) at 100 psi (7 bar) inlet pressure·
  • Excellent Horizontal throw of 20 meter high Fog Jet.
  • Very compact in construction and gives good flexibility of the operation while fire fighting.
  • Low Expansion, so less loss of foam due to breakage and thermal updraft and more cooling effect on burning surface.
  • Quick change over from jet to fog or spray even under water pressure with single fire fighter.
  • Easy maneuverability in horizontal and vertical plane.
  • Almost maintenance free.
  • Oil and Gas Plants.
  • Off-shore and On-shore platforms.
  • Oil Refineries.
  • Petroleum Storage Tanks and Depots.
  • Chemical and Fertilizer Plants.
  • Steel Plants.
  • Power Plants.
  • Airport Runways.
  • Ammunition Depots.
  • Defense General Stores.
  • Naval Ships and Submarines.
  • Fire Fighting Vessels/Tugs.
  • Ports.
  • Jetties.

Material of Construction:

Parameter Specification
Monitor body, barrel SS 316
Swivel Joint SS 316 / Bronze
Discharge Nozzle (Foam cum Water) SS 316
Base Flange SS 316
Worm and Worm Wheel SS 316
Foam Control Valve SS 316
Pick up pipe connection SS 316
Pick-up Tube at (JRCP) PVC

Technical Details:

Parameter Specification
Flow at 100 psi (7 bar) pressure 2000 US GPM (7570 LPM)
Nozzle Non-aspirating type
Induction Type By Aqua Powered inductor (JRCP) from minimum distance of 50 meter & above from Nozzle.
Induction Rate 3%
Monitor Elevation +90° and -30° Vertical
Rotation 360° Horizontal
Water Way Size 150 NB
Pick-up Tube Length 3 meters long PVC tube
Inlet Flange Size 150 NB ANSI B 165 150#flat face
Hydrostatic Test Pressure 21 bar
Finish/ Paint Fire red shade of Acrylic/PU/ Powder coating

Aqua Foam Jet Ratio Controller Pump:

  • Water operated foam pump (JRCP) suitable for feeding foam concentrate solution to the monitor nozzle from min. distance of 50 meter in horizontal plane. The inlet & outlet of JRCP is provided with 63 mm. Male & female coupling respectively.

Parameter Specification
Material of Aqua Powered Pump SS 316
Inlet and Outlet Coupling 2 1⁄2” Male/Female coupling made of SS 316
Foam Induction Rate 3%
Pick up tube PVC 3 Mtrs. Long fitted with suction Strainer
Delivery Distance Aqua Foam Jet Controller Pump is capable enough to feed foam solution to the monitor nozzle from minimum 50 meters in horizontal plane of SS

Performance at 100 PSI (in still air condition):

Parameter Specification
Water jet at 30° from Horizontal Plane 75 meters
Foam jet at 30° from Horizontal Plane 70 meters
Fog jet at 30° from Horizontal Plane 20 meters

Approval: UL Listed with following features:

Parameter Specification
Nozzle Non Air Aspirating Nozzle
Monitor Solution Flow 2000 GPM (single nozzle)
Operating Pressure 100 PSI
Induction By Aqua Powered inductor (JRCP) from minimum distance of 50 meter and above from Nozzle