“UL Listed – SHOOTFIRE – 2000/1000” JRCP Type Aqua Foam Nozzle 2000/1000 Variable Flow Monitor Fixed at 2000/1000 GPM

The manually operated non-aspirating Foam Monitor fully made of Stainless Steel, capable to discharging 2000 / 1000 US GPM (7570 & 3785 LPM) at 100 PSI (7 bar) inlet pressure over a range of 70 to 80 meters in horizontal direction and 35 to 40 meters in vertical direction. The Foam Monitor has adjustable flow discharge capacity of 2000 US GPM / 1000 US GPM in single Nozzle. Foam monitors are very compact in construction and gives good flexibility of the operation while fighting with fire.

Foam proportioning 3 % is done with help of water operated Jet Ratio Controller Pump (JRCP) suitable for feeding foam concentrate solution to the monitor nozzle from a distance of 100 meters. The Foam Monitor has facility for converting Water/Foam jet to fog and vice-versa very quickly and easily, even during continuous operation. Foam Monitor is provided with two numbers of self-locking swivel gear bearing for rotation in horizontal and vertical direction through hand wheel operation even under high operating pressures.

A single fire fighter can manually operate the Foam Monitor with large flow & long-range capability. The monitor assembly is designed to withstand the nozzle reaction force experienced during the operation of jet/ fog. The MONITOR and JRCP having the variable discharge capacity of 2000 & 1000 GPM is approved & listed by UL (USA).


  • Certified and Approved by(UL) Underwriters Laboratory USA for use with variable flow.
  • High Discharge Capacity of 2000 & 1000 US GPM (7570 & 3785 LPM) with Single Nozzle at 100 PSI inlet pressure.
  • Excellent Full Fog & Semi Fog Coverage.
  • Variable flow of 2000 & 1000 GPM in single nozzle (benefit of two monitor in single monitor).
  • JRCP is Capable to induct foam from a distance of 100 to the monitor nozzle.
  • JRCP with 3% induction to match variable flow (1000 & 2000 GPM) of monitor nozzle.
  • Very compact in construction and gives good flexibility of the operation while fire fighting
  • Low Expansion, so less loss of foam & more cooling effect on burning surface.
  • Quick change over from jet to fog even under water pressure with single firefighter.
  • Easy maneuverability in horizontal and vertical plane.
  • Fully Stainless Steel Construction..
  • Almost maintenance free.
  • Available In Fixed and Mobile Version.
  • Various Metallurgy Option.
  • Oil and Gas Plants.
  • Off-shore and On-shore platforms.
  • Oil Refineries.
  • Petroleum Storage Tanks and Depots.
  • Chemical and Fertilizer Plants.
  • Steel Plants.
  • Power Plants.
  • Airport Runways.
  • Ammunition Depots.
  • Defense General Stores.
  • Naval Ships and Submarines.
  • Fire Fighting Vessels/Tugs.
  • Ports.
  • Jetties.
Parameter Specification
Flow at 100 psi (7 bar) pressure 2000 & 1000 US GPM
Nozzle Non-aspirating type
Induction Type JRCP Type
Induction Rate 3% (As Per UL Guidelines)
Monitor Elevation +90° & - 10° Vertical
Rotation 360° Horizontal
Water Way Size 150 NB
Inlet Flange Size 6” NB 150# S.O.R.F Flange
Hydrostatic Test Pressure 21 bar
Finish/ Paint Fire red shade of Epoxy / Powder Coating

Material of Construction for Monitor and Nozzle:

Parameter Specification
Base Flange SS 304
Monitor Body SS 304
Swivel Joint SS 304 / Gun Metal / Bronze
Worm Shaft SS 304
Hand Wheel SS 304
Neck Ring SS 304
Foam Intake Coupling SS 304
Foam Nozzle SS 304 / Gun Metal / Bronze / Aluminum
Lifting Hook SS 304
JRCP SS 304
Foam Control Valve SS 304s

  • Monitor also available in metallurgy of SS 316 for special application.

Aqua Foam Jet Control Pump:

  • Water operated foam inductor (JRCP) is suitable for feeding foam concentrate solution to the monitor nozzle from a distance of 100 meters & above in horizontal plane. The inlet & outlet of JRCP are provided with 63 mm. Male & female coupling respectively. The monitor comes with 1 Nos. of JRCP for its use at 2000 GPM & 1000 GPM with a control valve for selecting the induction of 2000 and 1000 GPMat induction rate of 3%.

Parameter Specification
Material of Aqua Powered Pump SS 304
Inlet and Outlet Coupling 2 1/2” mm Male/Female coupling (SS 304)
Foam Induction Rate 3% (as per UL Guidelines) for 2000 & 1000 GPM
Pick up tube PVC 3 Meters Long
Delivery Distance Aqua Foam Jet Controller is capable to feed foam solution to the monitor nozzle from a distance of 100 meters & above in horizontal plane.

Performance of Monitor at 100 psi (in still air condition) at Nozzle at 1000 GPM:

Parameter Specification
Water jet at 30° from Horizontal Plane 70 meters
Foam jet at 30° from Horizontal Plane 65 meters
Fog jet at 30° from Horizontal Plane 20 meters
Water jet at 85° from Horizontal Plane 35 meters

Performance of Monitor at 100 psi (in still air condition) at Nozzle at 2000 GPM:

Parameter Specification
Water jet at 30° from Horizontal Plane 80 meters
Foam jet at 30° from Horizontal Plane 75 meters
Fog jet at 30° from Horizontal Plane 20 meters
Water jet at 85° from Horizontal Plane 40 meters

Approved: UL Listed with following features (Applied but Pending)

Parameter Specification
Nozzle Non Air Aspirating Nozzle
Monitor Solution Flow 2000 / 1000 GPM (single nozzle)
FOperating Pressure 100 PSI
Induction 3% Using JRCP able to feed foam from a distance of 100 meters to nozzle for variable monitor flow of 1000 & 2000 gpm