3D HAZChem Multipurpose (3-in-1) Aqua-Foam-DCP Type Fire Monitor of 1000GPM Capacity

The 3D Hazchem Multipurpose 3 in 1 Monitor is specially designed to throw Water, Foam, Dry Chemical Powder and spray, Jet & Fog through single nozzle to fight against hydrocarbon / polar solvent fire by a single fire fighter. The Multipurpose 3 in 1 Monitor is provided with non-aspirating type nozzle capable to discharging 1000 US GPM (3785 LPM) at 100 psi (7 bar) inlet pressure over a range of 60 meters in horizontal direction and 15 meters in vertical direction.

Water operated Jet Ratio Controller Pump (JRCP) is provided suitable for feeding foam concentrates solution to the monitor nozzle from distance of 50 meters & above. The Monitor has facility for converting Water / Foam / Jet to fog and vice-versa and also Dry Powder can be jetted from the centre of nozzle very quickly and easily, even during continuous operation. Monitor is provided with self-locking swivel gear bearing for rotation in horizontal and vertical direction through hand wheel operation even under high operating pressures.

The monitor assembly is designed to withstand the nozzle reaction force experienced during the operation of jet/ fog.


  • High Discharge Capacity of 1000 US GPM (3785 LPM) at 100 psi (7 bar) inlet pressure.
  • Excellent Horizontal throw of 60 meter long and above.
  • Water, Foam, Dry Chemical Powder and Fog through single nozzle to fight against hydrocarbon / polar solvent fire by a single fire fighter.
  • Quick change over of Water, Foam, Dry Powder and jet to fog or spray even under water pressure.
  • Low Expansion of Foam, so less loss of foam due to breakage and thermal updraft and more cooling effect on burning surface.
  • Monitor can be placed 50 meter away from the foam concentrate & feed foam solution by JRCP.
  • Easy maneuverability in horizontal and vertical plane.
  • Almost maintenance free.
  • Oil and Gas Plants.
  • Off-shore and On-shore platforms.
  • Oil Refineries.
  • Petroleum Storage Tanks and Depots.
  • Chemical and Fertilizer Plants.
  • Steel Plants.
  • Power Plants.
  • Airport Runways.
  • Ammunition Depots.
  • Defense General Stores.
  • Naval Ships and Submarines.
  • Fire Fighting Vessels/Tugs.
  • Ports.
  • Jetties.

Monitor:

Parameter Specification
Size 4 inches
Body S.S. seamless steel pipe, bend etc. duly treated with anti-corrosive paint, gunmetal swivel joint for horizontal and vertical movement duly covered gear operation
Rotation 360°
Elevation +90° (+75°, -15°)

Swivel:

Parameter Specification
Material LTB – Gr.2
Gear Wheel LTB – Gr.2
Worm Gunmetal

Nozzle:

Parameter Specification
Material of Construction LTB – Gr.2
Type of Foam used AFFF / ATC Foam
Discharge Capacity 1000 GPM
Horizontal Throw (min) at nozzle water pressure of 100 psi (7 bar)
a. Water
b. Foam
c. DCP

60 meters
55 meters
40 meters
Throw Vertical 30-40 meters
Foam Expansion 1:3 – 4
Fog (Curtain) 160°
K-Factor 100
Friction Loss Less than 10 PSI through monitor.

  • Semi Fog for tank cooling and dissipation of vapors and gases at a distance of 10 meters and above.

Flange:

Parameter Specification
Body S.S.
Specification ANSI-B-16.5 150 #

Other Construction Details:

Parameter Specification
Welding Radiography type
Working Pressure 7 Kg/cm2
Painting Two coats of red enamel paint